Product introduction
ARS-T200, a plasticizer and water reducer, is produced based on modified polymer compounds according to ASTM C494 and ISIRI-2930 standards. This plasticizer with the same performance as lignosulfonate is recommended for concretes with a water-cement ratio above 0.45.
This product is recommended for use in the ready and precast concrete industry in moderate and cold seasons and it will perform well for C25 to C30 resistance categories
Application
- ready concrete
- Pouring concrete in warm and temperate weather
- Production of high-quality mortar
- Architectural concretes
- Precast concretes
Advantages
- Reducing the ratio of water to cement materials in equal fluidity
- Increase in compressive strength in equal water-cement ratio
- Reducing water absorption and permeability
- Better distribution of cement
- Reducing cement consumption
- Increasing the efficiency and reducing the cost of concrete implementation
Consumption range
- Best use time: 5 minutes after complete mixing
- Effective time: 10 minutes after adding
- Consumption amount: 0.6 to 1% of cement weight
- Exact dosage: depending on the mixing plan
